2, select Image - Adjustments - Threshold, adjust the picture to clear, the following picture.
3, use a pen to erase brushing the clouds part of the sky into a full-white.
4, finally, select the image - adjustments - the reverse.
5, press Ctrl + J or double-click the background image - copy the layer, the following figure:
6, first of all, select the Transform Tool, press Ctrl + T or Edit - Free Transform, then select Edit - Transform - Flip Vertical, click OK to exit conversion tool. If it is not first activate the transform tool, after which all the layers have to do 11.
7, select a rectangular-shaped box tool box is checked image the upper part of the following diagram:
8, press cancel button or edit - remove the selected, press Ctrl + D or click on Select - delete, delete the selected part of the:
9, choose the Move tool, click the picture, drag it to the appropriate location, the following figure:
10, copy the current layer, press Ctrl + J or choose Layer - Duplicate Layer, this layer will be used to the production of water wave reflection, the following diagram:
11, choose a filter - distort - Glass, adjust the ripple effect, parameters are as follows:
12, choose a filter - blur - Motion blur, angle 90o, from 32, the following figure:
13, covering the reflection:
14, select Gradient tool production, parameter is set to the following figure:
15, the establishment of mask, as shown below, from the mask around the bottom 25% of the pull of the position of a gradient:
16 Now you mask layer, click on picture icons, exit mask layer:
17, select File - Open, find the nostalgic paper pictures, click OK. Zoom nostalgia paper, up to cover the whole picture, and then click to confirm:
18, paper transparency of nostalgia set to 50%, shown in Figure:
19, choose Layer - New Adjustment Layer - Hue Saturation, adjust the hue saturation. This layer is the most upper level, hue saturation transferred to your favorite colors, see below:
20, this, picture the following :
21, select File - Open, selected dancers pictures, click to confirm, modify the image size, then click the confirmation button keyboard.
22, with the magic wand and cut selected characters, if you are using Photoshop CS2 or earlier software, you can use out of filter (filter - out).
23, with the move tool to figure on the right-hand picture the middle of the location, as shown:
24, first of all, it is necessary to produce posters for the characters effect, we need to create a layer, therefore, the upper figure to copy images.
25, cancel the layer mask: Click on mask and into the trash.
26, select Layers - Create clipping mask, which will make the current layer in a transparent state, see below:
27, finally, adjust the image size: In the layers click the right mouse button (not the icon), and then select Modify Layer size. If you are using the Photoshop CS1 or earlier, you do not need to sub-step, because the picture has changed better. See below:
28, now we have set up layers, you can add effects. Select Image - Adjust - Threshold, parameters are as follows maps to confirm.
29, smooth edges to make images, we use the intermediate filter. Select Filter - variegated - the middle value, and adjust the edges smooth, as shown below:
30, in the character layers and change the layer mode to Multiply.
31, create a new layer (Layer - New Layer), layer mode color. Top new layer, and then select the layer - Create clipping mask, as shown below.
32, if your work area has not set palette, you can click on the window - Color. In the Color of the upper right corner click on the icon.
33, where optional in Color cyan, magenta or yellow. It is the first sample palette colors.
34, click the brush, set the hardness to 0%, see below.
35, choose the right brush size, height or width of the third character position, along the edge of painting, then change to another color (cyan, magenta or yellow), repeat this action, effect until the next map. Tutorial in this regard, see the.
36, for this effect, we use a gradient fill layer: Choose Layer - new fill layer - gradient, set by the white to transparent gradient effect , as shown below:
37, specific adjustments are as follows.
38, in the file window, click and drag the gradient, place the top left of the picture.
39, take a look at current results.
40, extract the characters: Hold down the Ctrl key, click the character mask icon (as shown), you see that people around the ant line appears.
41, click on any of a tool (such as magic wand), point-line patterns living ants move the mouse, we should note that only moving patterns rather than the layers.
42, in the layer column, click inside the gradient layer mask icon, press the Cancel key to cancel the constituency, this time will be the emergence of a shadow, see the following figure. Press Ctrl + D or choose - the cancellation of their constituency, cancel the selection.
43, press Ctrl + T or select Edit - they have transformation, drag box, enlarge the shadow of figures, and moved to the middle of light and shade gradient, and then click on the keyboard to confirm.
44, now we come to regulate the size of the shadow condenser. In the layer column, double-click the icon to edit the gradient, adjusting the scope of the size of the gradient, so that's wide enough to cover the shadow figure. If necessary, redo this step gradient condenser.
45, which is adjusted for the effect of map.
46, the following figure, select hue saturation that layer, and then select Layer - New Adjustment Layer - Levels, which will be Hue Saturation adjustment layer to create a Levels adjustment layer.
47, open the Levels Toolbar, move the middle slider to the right, lowering the brightness of the background.
48, open the brush tool bar, click the icon in the upper right corner, click on the following figure a square brush, when the dialog box shows whether the replacement of or add brushes, click on Add. Reduce the diameter of the main brush 24px, as shown below.
49, in accordance with the following three legends, setting parameters.
50 the establishment of a new layer on the gradient layer.
51, with selected brushes, brush the size of the thing was the size 2/3 times the foreground color is white, in the the current layer on the brush decorated, repeatedly tried several times, until the brush out your favorite pattern.
52, in order to produce the best results, choose a filter - variegated - the middle value, and adjust the radius until the transfer effects of a fillet , as shown below.
53, The following is added after the effect of fashion design plans. Next, we used the mask, so that the prospects in the background looks more natural.
54, select fashion design layer, click the layer mask icon bar below the rapid, add mask.
55, containing the election gradient mask layer: Press the Ctrl key, click the gradient layer mask icon (see figure below) , click on Select - reverse.
56, sure to select the mask layer layer style, you will see a mask layer surrounded by a white border. Press Cancel key to clear the constituency, and then press Ctrl + D abolished, mask layer as shown below.
57, click on the image to see the effect of full-figure bar.
◎welcome to give out your point。